Vehicles
Sections
23 not categorized PORSCHE 996 TURBO POWER KITCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2007-09 (includes uncategorized and accessory items) 97035294903EQ
$167.20
Make a selection 99612301376AT
$3,491.40
Make a selection FVD97010020
$7,588.90
Make a selection FVD631997FLE Our led daytime running light upgrade kit transforms your 997.1 turbo (2006-2009) into exactly the same day time running feature as 997.2 turbo. Daytime running lights apply a powerful highlight to your Porsche and also contribute an active safety feature. The led's will be bright during the day and will dim when the headlights are switched on. Our kit includes electronic module (voltage converter), cables and OEM led daytime driving lights from the 997.2 turbo. - ece approved
$2,124.10
Make a selection 100103041TU Mahle 4.1 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.1:1 compression. - 106 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. Water channels and case must be machined to fit. Please add the following to your order: 2 qty. Base gaskets, part # FVD10303905zfd 2 qty. Head gaskets, part # FVD10303905zkd 1 qty. O- ring base set, part # FVD10303905or 1 qty. O- ring head set, part # FVD10303905oro *please note: horsepower and torque gains depend on the softwa...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05
From $8,474.70
Make a selection 20934TD8RS It was only a matter of time before clutch masters built the ultimate clutch kit for the Porsche 996 and 997 turbo. With the success of their stage 3 OEM replacement kits holding 700 horsepower with daily driveability, clutch masters wanted to step up their clutch game and release this new 8.5 inch twin disk clutch with flywheel for the Porsche 911 turbo. This race version of the twin disk is recommended only for race use as initial pedal engagement as it requires finesse. The complete clutch weighs an astonishing 23lbs. The stock flywheel alone weighs about 40lbs! General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$6,156.00
Make a selection 100103038TU997 Mahle 3.8 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets with 23 mm wrist pin. - slip fit, steel (st52) cylinders. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.4:1 compression. - 102 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. *please note: horsepower and torque gains depend on the software used, camshafts, crankshaft and other internal modifications. 700+ hp and torque can be achieved with use of these pistons and cylinders with a proper engine build and software. Contact your sales person for ...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$14,654.60
Make a selection 35271223 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$11,765.24
Make a selection 21011196538 This sport muffler is engineered for the discerning Porsche 965 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 321 grade stainless steel. All piping is mandrel bent for reduced backpressure and increased performance. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whistle. Exhaust tips are 76 mm (3 inch) polished ovals with a rolled lip. Each kit includes complete installation hardware, wastegate pipe and clamps. Features: gains of up to 10 hp more* t 321 stainless steel mandrel bent new wastegate pipe new gaskets new hardware new muffler clamps *dependent upon boost level and other modifications. Sold in...(choose a part on the right to read more)
$2,127.42
Make a selection 210111997230 Brombacher 997 tt stainless steel race pipes General Fitment911 TURBO/GT2 2007-09
From $456.50
Make a selection 22011099705 FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity,...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09
From $1,334.30
Make a selection 35271423 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$13,655.24
Make a selection 20934TD8SS It was only a matter of time before clutch masters built the ultimate clutch kit for the Porsche 996 and 997 turbo. With the success of their stage 3 OEM replacement kits holding 700 horsepower with daily driveability, clutch masters wanted to step up their clutch game and release this new 8.5 inch twin disk clutch with flywheel for the Porsche 911 turbo. This race version of the twin disk is recommended only for race use as initial pedal engagement as it requires finesse. The complete clutch weighs an astonishing 23lbs. The stock flywheel alone weighs about 40lbs! General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$6,156.00
Make a selection FVD123019ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD123013 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123013ATK K-16/24 turbo (up to 555 hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbochar...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123014 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection BES99725040S Brombacher 997 tt (super sound version) stainless steel exhaust system General Fitment911 2005-08911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection VR997TT550 Vivid racing's stage 1 horsepower kit for the 997tt is designed for those that want a little more power over the stock 480 horsepower without creating alot of attention. The stage 1 kit includes our vr tuned obdii ecu flash, a pair of boost recirculation valves, new 1 step colder spark plugs, and a bmc air filter. Vr tuned provides you with your original file and your tuned file. At any point, you can load your original file back to your car and there will be no footprint that the car has been flashed for warranty. The brv's replace the diaphram system for a spring and piston design. This helps boost come on stronger and hold more consistant to redline. These install in place of the factory units. To help the...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09
$2,970.00
Make a selection BBI9963010001 The bbi autosport Porsche 996/997 turbo clutch slave cylinder conversion kit is a direct replacement part that eliminates the problematic factory power-assist system for improved reliability and pedal feedback. The factory power-assisted clutch system has always been the achilles heel for the Porsche 997 turbo. Utilizing the power steering system to help reduce the force needed to depress the clutch pedal, it is a flawed design that delivers a mushy pedal feel with poor feedback, and is highly prone to failure.
$1,330.00
Make a selection FVD123014ATK K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection 20934HD0F The perfect clutch for aggressive drivers that still desire smooth engagement like the OEM unit. Clutch masters stage 2.5 (formally known as the "stage 3") clutches utilize a full face disk made from clutch masters "fiber tough" material which is strong like kevlar but less abrasive on the flywheel. The pressure plate side is an organic disc to ensure a strong grip to hold your high horsepower Porsche. This will provide more holding power than stage 1, yet it still offers exceptionally smooth driveability and long life. The kit can be used with the factory flywheel without doing a break in or resurfacing or you can upgrade to a light weight flywheel for great turbo spool and throttle response. General Fitment911 GT3 2003-05911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2007-09
$2,505.33
Make a selection FVD123025ATK K24/26 exchange turbo (only OEM k24 exchange accepted) (up to 700 hp) power is focused on mid and top range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications. The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate...(choose a part on the right to read more)
$2,976.60
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |